WEARIFY

30V Volt Meter with PIC16F676


This is a simple 30V volt meter using PIC16F676 micro controller with 10-bit ADC (analog to digital converter) and three 7 segment LED displays. You can use this circuit to measure up to 30V DC.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjSKrNoRr58aFFiFaulRWb7onbysZJG6rHQS-LZCDmab_r0qGb-oLwwEhndEoJqcZSYNWlzW3pM55UrAAAIxbPAC6gU3om2xaBZhKid0cb0ThPIRaDssv8bdv08n9yWdNNmov6X8Xlkd1um/s1600/30v-volt-meter-with-pic16f676.jpg


The possible applications are on bench power supply or as a digital panel meter in various systems. PIC16F676 is the heart and brain of this circuit. The internal adc of the mcu with a resistor network voltage divider is used to measure the input voltage.

Then 3 digits of comm anode 7 segment display is used to display final converted voltage. As you can see in the schematic the displays are multiplexed with each other. It means we switch on one display and put the corresponding digit on this while other two displays are off this cycle goes for each of the displays.

WEARIFY

About WEARIFY -

Author Description here.. Nulla sagittis convallis. Curabitur consequat. Quisque metus enim, venenatis fermentum, mollis in, porta et, nibh. Duis vulputate elit in elit. Mauris dictum libero id justo.

Subscribe to this Blog via Email :